 |
|
AC
Servo Terminal Connection
| 200V
Class
| Note |
1:
For single phase input AC 220 to 230V drive, Only use L1 and
L2. (No connection with L3) |
| |
2:
A battery is used only for the absolute encoder. |
| |
3:
The regenerative braking resistor is built-in the drive for
400W to 750W. In case of insufficient braking capacity, remove
the short bar between B1 and B2. Connect the external braking
resistor between RB and (+). |
|
| 400V
Class
| Note |
1:
Connect three phase 380 to 480V to L1, L2 and L3, and single
phase 200 to 240V to L1C and L2C. Do not input 380 to 480V to
L1C and L2C. Make sure when using a transformer that the secondary
is 200 to 240V. |
| |
2:
In case of insufficient braking capacity, remove the short bar
between B1 and RB. Connect the external braking resistor between
RB and (+). |
| |
3:
Earth Connection ( ) |
|
|
